Welcome! Log In Create A New Profile

Advanced

Switch Numbers

February 23, 2001 09:45PM
Switch numbers are based upon the frog angle.
Actually, it is the distance from the point of the frog to where the rails are 1 foot apart on the gauge side of the rails. Another way of finding the number is to divide the length of the tongue (point to end of rail at joint) by the width of the heal (distance between the gauge sides of the opposite rail joints) [this method is quoted from a 1920's book on railroad alignment].
Brian Norden
Subject Author Posted

Switches and turnouts

J.B.Bane (SVRy) February 23, 2001 07:39PM

Re: Switches and turnouts

George Gaskill February 23, 2001 09:39PM

Re: Switches and turnouts--minor correction

GG February 23, 2001 09:42PM

Switch Numbers

Brian Norden February 23, 2001 09:45PM

Re: Switch Numbers

PRR February 24, 2001 12:36AM

Re: Switches and turnouts

Dan Markoff February 24, 2001 08:05AM

Re: Switches and turnouts

Richard Boulware February 24, 2001 09:32AM

Re: Switches and turnouts

Rick Steele March 01, 2001 01:04AM

Re: Switches and turnouts

rick b March 02, 2001 03:18AM

A&K URL

Chile John March 02, 2001 07:57AM

Re: Switches and turnouts

rdmstr February 24, 2001 07:02PM

Re: Switches and turnouts

J.B.Bane (SVRy) February 25, 2001 04:13PM

Re: Switches and turnouts

Phil Johnson February 25, 2001 05:27PM

Re: Switches and turnouts

PRR February 25, 2001 06:15PM

Yes, build as big as you can

Brian Norden February 25, 2001 07:49PM

Re: Yes, build as big as you can

rdmstr February 25, 2001 08:36PM

Re: The Engineering Fan

PRR February 25, 2001 09:24PM



Sorry, you can't reply to this topic. It has been closed.