Welcome! Log In Create A New Profile

Advanced

Re: Historic Content Alert--Chama Roundhouse info

December 14, 2011 05:20PM
drgwk37 Wrote:
-------------------------------------------------------
> I also went back and looked at a book which was
> talking about these stalls in particular and it
> had stated that there was a drop pit--so that is
> where I got that from. It's really hard when
> people who put books out don't get correct or
> accurate info and then they print it and it almost
> becomes true on that basis alone. I thank those
> historians out there now like Jerry Day who go out
> of there way to ensure things like this are
> corrected. I may even write to the author of this
> publication and see if he is interested in
> correcting the error in any future publications.
> This is why I feel so strongly about keeping
> things as historically correct so a real true
> representation is there to see and touch but also
> so history is not altered. Just like the usage of
> white paint on the handrails of the D&RGW
> cabeese--they were painted silver but look at any
> model that is produced and it's white.
>
> William
> aka drgwk37


Before you go jumping on this author, perhaps consider other reasons this information may have been in the book. What came to my mind was the possibility that maybe what the author had was a sketch, drawing, or D&RGW original plans, which might have called for a drop pit, and it was never actually made.

It is true that one has to be wary of information in books and other sources, cause there are times when things are just not true. I have been guilty of putting things in videos that turned out to be wrong. One such statement I put in a video was in 1988 on a show called "CSX F's" CSX was using F-units on Roadrailer service for about 6-8 months.
One place I shot them was a location named Chaska, where the train went right through the old helper coaling tower(Concrete). My sentence was something like this. "F-units 118 and 119 look great going under the old Chaska coaling tower that once saw L&N steam such as the M1's" A notable L&N historian later told me that the M1 class 2-8-4's never ran south of Corbin, Ky(Chaska was south of Corbin). So something I assumed turned out to be correct. So when in doubt its best to leave it out!!!! This is why most of my early videos had little narration.

Currently I am working on a project regarding a subject and I know three individuals who were in on the ground floor of this. I have contacted all of them, but for the most part they have been reluctant to give me the correct history. After two months of waiting around I am simply going to gloss over it in broad terms and get on with the project. A chance to set the history correct will be lost but thats the way it goes.

Folks have to realize that just cause you read it in a book it is not necessarily always 100% correct.

Cheers,
Greg Scholl
[www.gregschollvideo.com]
Subject Author Posted

Historic Content Alert--Chama Roundhouse info

drgwk37 December 03, 2011 03:24PM

Re: Historic Content Alert--Chama Roundhouse info

wisconsinmike December 03, 2011 05:38PM

Chama round house/ machine shop history ?s Attachments

Jeff Ramsey December 03, 2011 07:35PM

D&RGW/ CATS Machine Tools Attachments

Jeff Ramsey December 03, 2011 08:01PM

Re: D&RGW/ CATS Machine Tools

nedsn3 December 04, 2011 12:53PM

Re: D&RGW/ CATS Machine Tools

Dennis Tebo December 05, 2011 08:38AM

Re: D&RGW/ CATS Machine Tools

Jeff Ramsey December 05, 2011 04:03PM

Re: D&RGW/ CATS Machine Tools

Dennis Tebo December 05, 2011 05:05PM

Re: D&RGW/ CATS Machine Tools

Earl December 07, 2011 12:05PM

Re: D&RGW/ CATS Machine Tools

NGJunkie December 07, 2011 06:20PM

Re: D&RGW/ CATS Machine Tools

Jeff Ramsey December 08, 2011 01:28AM

Re: D&RGW/ CATS Machine Tools

NGJunkie December 08, 2011 03:57AM

Re: D&RGW/ CATS Machine Tools

Fritz Klinke December 08, 2011 11:17AM

Re: D&RGW/ CATS Machine Tools

employee2 December 10, 2011 03:13AM

Re: D&RGW/ CATS Machine Tools - floors?

Dave_A January 18, 2021 01:24PM

Re: D&RGW/ CATS Machine Tools - floors?

Tank Smith January 18, 2021 01:38PM

Re: D&RGW/ CATS Machine Tools - floors?

Dave_A January 19, 2021 01:17PM

Re: D&RGW/ CATS Machine Tools - floors?

Tank Smith January 20, 2021 01:07PM

Re: D&RGW/ CATS Machine Tools

Mark Yeamans January 13, 2016 01:50AM

Re: D&RGW/ CATS Machine Tools

Everett Lueck January 13, 2016 08:03AM

Re: Chama round house/ machine shop history ?s

davegrandt December 06, 2011 08:43AM

Re: Chama round house/ machine shop history ?s

Jeff Ramsey December 07, 2011 06:36AM

Re: Chama round house/ machine shop history ?s

bonefish December 07, 2011 10:26AM

Re: Chama round house/ machine shop history ?s Attachments

Jeff Ramsey December 15, 2011 10:48PM

Re: Chama round house/ machine shop history ?s

John Cole December 15, 2011 11:15PM

Re: Chama round house/ machine shop history ?s Attachments

bonefish December 16, 2011 12:36PM

Re: Chama round house/ machine shop history ?s Attachments

Jeff Ramsey December 16, 2011 08:31PM

Re: Historic Content Alert--Chama Roundhouse info

Rich Murray December 04, 2011 05:13AM

Re: Historic Content Alert--Chama Roundhouse info

Greg Raven December 04, 2011 11:13AM

Re: Historic Content Alert--Chama Roundhouse info

hank December 04, 2011 12:20PM

Re: Historic Content Alert--Chama Roundhouse info

Greg Raven December 04, 2011 01:16PM

Re: Historic Content Alert--Chama Roundhouse info

wisconsinmike December 04, 2011 12:20PM

Re: Historic Content Alert--Chama Roundhouse info

Greg Raven December 04, 2011 01:19PM

Re: Historic Content Alert--Chama Roundhouse info

FordCVP71 December 07, 2011 07:11AM

Re: Historic Content Alert--Chama Roundhouse info

Charlie Mutschler December 08, 2011 06:40AM

Re: Historic Content Alert--Chama Roundhouse info

Greg Raven December 10, 2011 12:42PM

Re: Historic Content Alert--Chama Roundhouse info

drgwk37 December 10, 2011 01:23PM

Re: Historic Content Alert--Chama Roundhouse info

Greg Raven December 10, 2011 02:02PM

Re: Historic Content Alert--Chama Roundhouse info

Earl December 12, 2011 12:24PM

Re: Historic Content Alert--Chama Roundhouse info

employee2 December 13, 2011 02:02AM

Re: Historic Content Alert--Chama Roundhouse info

drgwk37 December 13, 2011 10:08AM

Re: Historic Content Alert--Chama Roundhouse info

Jeff Ramsey December 13, 2011 03:37PM

Re: Historic Content Alert--Chama Roundhouse info

employee2 December 14, 2011 01:08AM

Re: Historic Content Alert--Chama Roundhouse info

drgwk37 December 14, 2011 08:47AM

Re: Historic Content Alert--Chama Roundhouse info

Greg Scholl December 14, 2011 05:20PM

Re: Historic Content Alert--Chama Roundhouse info

employee2 December 15, 2011 01:19AM

Re: Historic Content Alert--Chama Roundhouse info

drgwk37 December 15, 2011 08:59AM

Re: Historic Content Alert--Chama Roundhouse info

Rich Murray December 15, 2011 09:10AM

Re: Historic Content Alert--Chama Roundhouse info

GeorgeGaskill January 13, 2016 12:21AM

Re: Historic Content Alert--Chama Roundhouse info

John C December 07, 2011 06:15PM

Re: Historic Content Alert--Chama Roundhouse info

jrstrait December 08, 2011 07:51AM

Re: Historic Content Alert--Chama Roundhouse info

Rich Murray December 08, 2011 10:55AM

Re: Historic Content Alert--Chama Roundhouse info

bonefish December 08, 2011 12:40PM

Belts & shafts

hank December 08, 2011 01:00PM

Re: Belts & shafts

Stewart Rhine December 13, 2011 07:55PM

Re: Historic Content Alert--Chama Roundhouse info Attachments

Jeff Ramsey December 10, 2011 07:23AM

Re: Historic Content Alert--Chama Roundhouse info

bonefish December 10, 2011 10:07AM

Re: Chama Roundhouse boilers info

hank December 10, 2011 10:37AM

Re: Chama Roundhouse boilers info

bonefish December 10, 2011 10:48AM

Re: Historic Content Alert--Chama Roundhouse info Attachments

Jeff Ramsey January 12, 2016 10:17PM

Re: Historic Content Alert--Chama Roundhouse info

John C December 13, 2011 08:48PM



Sorry, only registered users may post in this forum.

Click here to login