Welcome! Log In Create A New Profile

Advanced

Re: Alamosa February 10, 1939

February 10, 2009 11:11PM
" My question is how and where did #115 get in front of the Rotary into Chama"

Well, it seems there is a slight error here. Not sure which way to go here. One of the arrival times for either the OM or No. 115 is wrong. The times I posted are what is recorded.

This will tie in with your other question.

The OM went on duty at 1:45 AM. The conductor states they were on duty 17 hours and 50 minutes. This is 1 hour and 50 minutes over the 16 hour law.

Usually, when a crew is over the 16 hour law arrival time and tie up time are the same. In this case both arrival and tie up time is shown as 7:50 PM. However, 17 hours and 50 minutes would make arrival time at Chama 7:35 PM.

The time No. 115 left Osier is not shown so cannot reconcile the 3 hours 10 minutes to Chama that conductor reported. The engineer on No. 115 tied up Chama 7:55 PM which would coincide with 7:45 PM arrival.

In any event No. 115 did not arrive ahead of OM

Let's go with the thought that OM arrived 7:35 PM and tied up 7:35 PM. Perhaps when the times were put in writing the 17 hours 50 minutes thought was in mind and after writing "7" wrote 50 instead of 35 ???

Jimmy
Subject Author Posted

Alamosa February 10, 1939

Jimmy Blouch February 10, 2009 05:09PM

Alamosa February 10, 1939 Fireman

Hoss February 10, 2009 08:15PM

Re: Alamosa February 10, 1939 Fireman

John West February 10, 2009 09:34PM

Re: Alamosa February 10, 1939 Fireman

SoCalCond February 10, 2009 09:35PM

Re: Alamosa February 10, 1939 Fireman

Hoss February 11, 2009 08:06PM

Re: Alamosa February 10, 1939

rod February 10, 2009 08:35PM

Re: Alamosa February 10, 1939 Attachments

rod February 10, 2009 10:04PM

Re: Alamosa February 10, 1939

Jimmy Blouch February 10, 2009 11:11PM

Re: Alamosa February 10, 1939

rod February 10, 2009 10:23PM

Re: Alamosa February 10, 1939

John Bush February 12, 2009 08:54AM

Re: Alamosa February 10, 1939

Jimmy Blouch February 12, 2009 11:34AM



Sorry, only registered users may post in this forum.

Click here to login