Welcome! Log In Create A New Profile

Advanced

Re: Chama Roundhouse

January 19, 2001 07:29PM
OK, I've got another Chama Roundhouse question: The [brick] roundhouse started out w/ 9 stalls, was reduced to 5, then to todays 2. I've seen photos of the 5 stall house, but W/O the TURNTABLE. Did the turntable come out at the same time the 1st 4 stalls were removed? That is: anyone have a photo of the 5 stall hse WITH the turntable? By the way, I agree the big K's would indeed fit in the roundhouse [just] but they'd hardly have matched up w/ the old smokejacks or left any room to get around them! But in Richard Lind's "Narrow Gauge Country" there's a photo of 483 taken from inside the house- there is what appears to be a smokejack in the ceiling near the doors [as built, they were at the other end]. This would allow a K to back in, with her tender in the machine shop, and close the doors. Can anyone confirm this? SR
Subject Author Posted

Chama Roundhouse

SR Bush January 12, 2001 06:51PM

Re: Chama Roundhouse

Al P. January 12, 2001 07:19PM

Roundhouse, or Enginehouse?

Mike Trent January 12, 2001 09:20PM

Re: Roundhouse, or Enginehouse?

SR Bush January 12, 2001 09:35PM

Good Luck!

Mike Trent January 12, 2001 09:49PM

Re: Chama Roundhouse

Ted Miles January 12, 2001 09:56PM

Re: Chama Roundhouse

SR Bush January 13, 2001 03:31AM

Turntable news - sorta

John Craft January 13, 2001 08:56AM

Re: Chama Roundhouse

Chile John January 13, 2001 05:04PM

Re: Chama Roundhouse

Joe Batson January 15, 2001 02:39PM

Re: Chama Roundhouse

Earl Knoob January 16, 2001 07:22AM

Re: Chama Roundhouse

Frank Martindell January 19, 2001 10:16AM

Re: Chama Roundhouse

SR Bush January 19, 2001 07:29PM

Re: Chama Roundhouse

Frank Martindell January 23, 2001 12:10PM

Re: Chama Roundhouse

Dave Dye January 23, 2001 09:55PM

Re: Chama Roundhouse

Frank Martindell January 24, 2001 07:22PM

Re: Chama Roundhouse

John Templeton January 25, 2001 07:46AM

Re: Chama Roundhouse

Dave Dye January 25, 2001 09:55PM



Sorry, you can't reply to this topic. It has been closed.