John Cole Wrote:
-------------------------------------------------------
> Jeff Taylor Wrote:
> --------------------------------------------------
> -----
> > Good stuff. I just hope they know that the
> truck
> > side bearings on the tank car aren't supposed
> to
> > touch on both sides.
>
>
> Jeff I talked to Chuck the team leader putting the
> trucks together and he said he didn't put either
> one of the two trucks they assembled under a tank
> car because they didn't have a big forklift. This
> photo was from another car, and Chris Trunk who is
> restoring the frameless cars is leaving a 1/4" gap
> on the side bearings as per specs .
Excellent. We are still planning to have our GRAMPS car painted this year.
Ed Drgw practice calls for 1/4" on each side if the side bearings aren't touching, 1/2" if one side is touching.
Jeff Taylor
CRRM curator of equipment and rolling stock.